Peumatic Grouting pump is designed for stress and filling grouting of cement and bentonite slurries. It is primarily used for injecting (grouting) bar anchors and the drill holes to have the ability to reinforce the loose rock mass. The most grain measurement can not exceed 0.2 mm.
Grouting pump operation and maintenance is easy, secure and dependable. This pump is utilized in mines operating under troublesome situations as a result of it’s reliable and explosion-proof.
Basic Pneumatic Grouting pump embody: An air inlet, the pneumatic cylinder, mounting base body and stand, pressure gauge, pumping cylinder, outlet with quick release coupling and wheels.
How it works
Pneumatic pressure within the air cylinder exerts a high pressure on the grout combination which leads to ejection of grout with a excessive pressure and velocity. The valves of the air cylinder in the pump operate routinely to actuate the cylinder. The pneumatic cylinder then moves the plunger up and down to finish the pumping cycle.
Pneumatic grout pump can be pushed even without Electrical power supply in distant areas by using engine pushed compressor.
Applications
The pump is majorly utilized in development and mining trade for injecting material into extensive and medium measurement hole in beams, columns ,basement partitions and flooring, carry shaft concrete wall fill-up and so on. In mining trade it’s used to replenish cement answer where there is a gap exists between construction and rock and for soil stabilization.
Detachable design tends to straightforward upkeep and transportation. Challenging works like Grouting in Bridges.
เกจวัดแรงดันแก๊ส : How hydraulic submersible pumps work
This pump is extensively utilized in tunnels, coal mine, bridges and dams, building basis, and other underground projects, and inflammable, explosive sites and other bad setting.
It has application in chemical business also to pump out chemical slurries.
The pump is electrical energy free so, can be used at any web site situation whether or not it’s rural or city.
Mining Pneumatic Grouting pump has a bigger discharge slurry adjustment range. Generally the ultimate quantity of the grouting quantity is 8 or10 instances of the amount at first. And the ultimate grouting quantity proves that filling is compacted.
Simply put; Pneumatic high-pressure grouting pump is specially designed for high-pressure grouting. And it adopts full hydraulic drive, it’s strain and circulate may be adjusted according to the necessities of grouting,(The circulate of grouting pump is 0-100L/min, stress of discharge is 0-10MPa).in addition to, This Pneumatic high-pressure grouting pump can be used for grouting single or double fluid.
High-pressure grouting pump is principally used for highways, railways, water and electrical energy, construction, mining and so forth. ground/underground construction.
Benefits
Mining Pneumatic Grouting pump has some nice advantages of low vitality consumption, small vibration, low noise, small size, excessive effectivity, reliable efficiency, stress and circulate management, lengthy life and so on. Common mine grouting pump has pneumatic injection pump, twin fluid injection pump, extrusion injection pump and piston injection pump.
Pneumatic grout pump is also Light weight and with a wheelie design it may be carried easily. It is designed for easy operation and low upkeep. Last but not least its spare parts are simply out there.
Share