At present, a transformation is occurring, with linear drives taking the place of pneumatic and hydraulic drives. Here, there is no longer any scope for measuring pressure. However, WIKA has another solution: Force measurement.
Hydraulic or pneumatic cylinders are increasingly being replaced by electrical propulsion technology. For this, however, it is necessary to implement force measurement using force transducers/force sensors. Force measurement through pressure measurement in a hydraulic unit or pneumatics isn’t possible. A typical example for this is linear drives.
Force measurement: the initial situation
A linear drive is a drive system that leads to a translational movement. Machine elements or system parts are accelerated in a straight line. It makes sense to provide force measurement such drives, since a transformational change happens to be happening: Hydraulically and pneumatically powered drive elements are receiving replaced with a combination of electric motor and mechanical thrust units. These modern drive systems are kept simple via modular systems but can, nevertheless, be adapted to individual customer applications with little effort. They also feature a advanced of versatility. However, pressure measurement is not any longer possible here.
Force measurement: the advantages
This change supplies the perfect opportunity to measure forces directly along the way. Force measurement can be utilized with practically any linear drive. For the complete measurement of the forces, it doesn?t matter where within the force flow the force transducer is integrated. This can be on the motor, on the actuator or at the idea of force application. Force could be identified reliably at any point in the force flow.
The F2301 force transducers are suitable for force measurement in linear drives
Force measurement: WIKA products in application
For force measurement, thin-film sensors from WIKA? Poisonous are employed, which are welded onto the measuring tubes of the force transducers. This is also among the reasons why tecsis, as the force measurement specialist within the group, is renowned for innovative quality solutions in metrology and sensor technology. With the different force transducer solutions, from the standard to the miniature tension and compression force transducers, the optimum solution can be found for every application. This may involve controlling joining forces on electrically powered spindle presses, or monitoring the overload protection in lifting cylinders. The robotic arms of gripping and clamping robots as well as punches, presses and welding tongs can even be measured. With the successful application for the EU ? Wonderful ? project, the sensors also meet up with the extremely high safety requirements of the aviation industry.
Note
Our portfolio, our quality standards, our production sites: You will find more detailed information on the subject of force measurement on the WIKA website and in our flyer.