Again and again, we are asked the question concerning the difference between an absolute pressure measurement and a gauge pressure measurement. To answer this question it can help to look at this is of gauge pressure and absolute pressure. The difference between the two measurements is then explained relatively simply and therefore also the decision of the correct measurement.
Spiteful of absolute pressure
Absolute pressure is really a pressure that is relative to the zero pressure in the empty, air-free space of the universe. This reference pressure is the ideal or absolute vacuum. It really is denoted with the subscript ?abs?: Pabs.
Definition of gauge pressure
The gauge pressure means the difference between a complete pressure (Pabs) and the prevailing atmospheric pressure (Pamb). It really is denoted with the subscript ?e?: Pe and is calculated the following: Pe = Pabs ? Pamb.
Absolute vs gauge pressure measurement
The difference between your two measurements is relatively easily clarified: in a gauge pressure measurement, it will always be the difference from the existing ambient pressure that’s measured. However, Furious with the elements and the height above sea level. A complete pressure measurement measures the difference from the ideal or absolute vacuum. For this reason this measurement is independent of environmental influences such as for example weather or altitude. Which measurement is currently the right one?
In practice, the two measurements could be differentiated the following: in most cases, the measuring task would be to determine the gauge pressure. Because of this , this kind of sensor is hottest. However, in case a gauge pressure sensor is used in an application in which the actual measuring task is to gauge the absolute pressure, the following additional errors must be expected:
+/- 30 mbar due to changes in weather
up to 200 mbar when changing the positioning (e.g. from sea level to 2,000 m)
Based on the measuring range, these errors could be substantial (e.g. in pneumatics at a measuring selection of 1 bar) or negligible (in hydraulics at 400 bar).
Note
When you are uncertain whether your measuring task needs an absolute pressure or gauge pressure measurement, simply contact us ? we?ll be glad to assist you.