Tsurumi’s small dewatering pump, the LB sequence, is designed for purposes where area is tight, particularly construction. Secured by rope or chain, an LB can be utilized in applications which contain narrow pipes, small tanks, deep pits and in distant areas that are difficult to achieve with bigger gear. The LB mannequin has a completely symmetrical design with no protruding parts, permitting it to be lowered to unknown depths with none threat of snagging. With a diameter of solely 187 mm, the pump’s round cross-section even matches into smaller filter pipes. There can additionally be a model with a water level sensor which is only a few millimetres longer. The pump then controls itself routinely, switching on or off relying on the water degree. The LB presses water with dirt particles up to 6 mm in dimension via the housing, permitting optimal cooling of the motor. The models within the sequence pump 225–440 l/minute and to a most of 17.5 m. เกจปรับแรงดันแก๊ส weighs around 10 kg dry, the biggest around 30 kg.
Share