Peumatic Grouting pump is designed for stress and filling grouting of cement and bentonite slurries. It is primarily used for injecting (grouting) bar anchors and the drill holes so as to reinforce the free rock mass. The maximum grain dimension can’t exceed 0.2 mm.
Grouting pump operation and maintenance is straightforward, safe and dependable. This pump is utilized in mines working beneath troublesome conditions because it is reliable and explosion-proof.
Basic Pneumatic Grouting pump embody: An air inlet, the pneumatic cylinder, mounting base frame and stand, pressure gauge, pumping cylinder, outlet with quick release coupling and wheels.
How it actually works
Pneumatic stress within the air cylinder exerts a excessive strain on the grout mixture which outcomes in ejection of grout with a excessive strain and velocity. The valves of the air cylinder within the pump perform automatically to actuate the cylinder. The pneumatic cylinder then strikes the plunger up and down to finish the pumping cycle.
Pneumatic grout pump could be driven even without Electrical power provide in remote areas by using engine driven compressor.
Applications
The pump is majorly utilized in building and mining business for injecting materials into extensive and medium size gap in beams, columns ,basement walls and flooring, carry shaft concrete wall fill-up and so on. In mining business it is used to fill up cement solution where there’s a hole exists between structure and rock and for soil stabilization.
เกจวัดแรงดันปั๊มลม tends to straightforward maintenance and transportation. Challenging works like Grouting in Bridges.
READ: How hydraulic submersible pumps work
This pump is widely utilized in tunnels, coal mine, bridges and dams, constructing foundation, and different underground tasks, and inflammable, explosive websites and different bad setting.
It has utility in chemical business also to pump out chemical slurries.
The pump is electricity free so, can be used at any website situation whether or not it’s rural or urban.
Mining Pneumatic Grouting pump has a larger discharge slurry adjustment vary. Generally the ultimate quantity of the grouting volume is eight or10 times of the quantity to start with. And the final grouting amount proves that filling is compacted.
Simply put; Pneumatic high-pressure grouting pump is specifically designed for high-pressure grouting. And it adopts full hydraulic drive, it’s strain and move could be adjusted according to the requirements of grouting,(The move of grouting pump is 0-100L/min, stress of discharge is 0-10MPa).in addition to, This Pneumatic high-pressure grouting pump can be used for grouting single or double fluid.
High-pressure grouting pump is principally used for highways, railways, water and electricity, construction, mining etc. ground/underground construction.
Benefits
Mining Pneumatic Grouting pump has the benefits of low vitality consumption, small vibration, low noise, small size, excessive effectivity, reliable efficiency, strain and flow management, long life and so on. Common mine grouting pump has pneumatic injection pump, dual fluid injection pump, extrusion injection pump and piston injection pump.
Pneumatic grout pump can be Light weight and with a wheelie design it can be carried simply. It is designed for simple operation and low upkeep. Last however not least its spare parts are easily obtainable.
Share