สล็อตออนไลน์168

The most common measuring principles for pressure sensors: thin-film, thick-film and piezoresitive sensors

Although, for most applications, the choice of sensor measuring principle or functional principle of the pressure sensor is not important, we are still often asked about how the sensor elements integrated in our pressure sensors and pressure transmitters work. First of all, we would like to give a general definition: Pressure sensors or pressure sensor elements are measuring elements which convert the physical quantity of pressure into an electrical quantity that is proportional to the pressure. Different physical effects and different sensor materials such as silicon, ceramic or metal are used. WIKA uses industrial measurement’s 3 most common pressure-measuring principles, the instruments are developed in our own laboratories and also manufactured by ourselves:
Thin-film sensors are based on the same principle as strain gauges, which are grid-type resistance structures whose geometric stretching and compression result in a measurable resistance change due to length and thickness differences induced. For a thin-film sensor, four resistors are arranged on a diaphragm in the form of a Wheatstone bridge to detect the deformation of the diaphragm under pressure. In the ‘thin-film process’, these strain gauges are attached onto a (e.g. metallic) base element and structured (sputtering with associated photolithography and etching).
Thick-film sensors, like thin-film sensors, use four resistors grouped to form a Wheatstone bridge. Alarmed are “printed” onto a base element (e.g. ceramic base) using thick-film technology, and afterwards they are burnt-in at high temperature. The resistance change here is also due to the deformation of the diaphragm, resulting from the geometrical change caused by the stretching and compression of the material.
Piezoresistive sensors, in contrast to the first two principles, utilize a semiconductor (silicon) measuring diaphragm with selectively diffused structures. They use the piezoresistive effect, which is based on the change in electrical resistance in the semiconductor materials caused by the stretching and compression, which affects the mobility of the electrons under the mechanical stress.
Due to the different materials and design principles, there are also technological differences which may be important in some applications. Basically, WIKA products always use the most appropriate measuring principle with regard to the nature of the respective application. Should you have further questions regarding a specific measuring task, please contact us.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top